Filter
Top Products
128
Menu Organization and Operation
Chapter 5 Menu Displays and Detailed Settings
07 SD DETAIL SD DETAIL ON / OFF ON – Turn SD detail correction on or off. A
SD DETAIL LEVEL (–99 to +99) 0 Sets the SD detail level.
SD CRISPENING Sets the SD crispening level.
SD DTL LIMIT Sets the SD detail limiter level.
SD LEVEL DEPEND Sets the SD level depend level.
SD DTL
FREQUENCY
Sets the SD H detail signal
frequency level.
SD DTL H/V RATIO Sets the SD V detail ratio.
SD CROSS COLOR Sets the amount of SD cross color
suppression.
08 WHITE
SHADING
WHITE SHADING CH
SEL
R / G / B R – Selects the channel adjusted with
this menu. If TEST is selected with
the output signal selector switch
(button) of a remote control unit,
the setting matches that of VIDEO
OUT SEL.
A
VIDEO OUT SEL VBS / R / G /
B
VBS Selects the signal output from the
VIDEO OUT connector.
R WHT H SAW (–99 to +99) 0 H SAW white shading correction
R WHT H PARA H PARA white shading correction
R WHT V SAW V SAW white shading correction
R WHT V PARA V PARA white shading correction
WHITE SAW/PARA ON / OFF ON Turns white shading SAW/PARA
correction on or off.
09 BLACK
SHADING
BLACK SHADING CH
SEL
R / G / B R – Selects the channel adjusted with
this menu. If TEST is selected with
the output signal selector switch
(button) of a remote control unit,
the setting matches that of VIDEO
OUT SEL.
A
VIDEO OUT SEL VBS / R / G /
B
VBS Selects the signal output from the
VIDEO OUT connector.
R BLK H SAW (–99 to +99) 0 H SAW black shading correction
R BLK H PARA H PARA black shading correction
R BLK V SAW V SAW black shading correction
R BLK V PARA V PARA black shading correction
BLACK SAW/PARA ON / OFF ON Turns black shading SAW/PARA
correction on or off.
MASTER BLACK (–99 to +99) 0 Adjusts the master black level.
MASTER GAIN(TMP) –3 / 0 / 3 / 6 /
9 / 12 / 18 / 24
/ 30 / 36 / 42
dB
0dB Temporarily adjusts the master
gain value.
10 DCC DCC D RANGE 200% to
460%
460% – Sets the dynamic range applied
when DCC is on.
A
DCC POINT (–99 to +99) 00 Adjusts the DCC minimum knee
point.
DCC GAIN Adjusts the gain vs. the DCC
detected value.
DCC DELAY TIME Adjusts DCC reaction speed.
ADVANCED menu
No. Page Item Settings Default
setting
USER
menu
page
Description File