Filter
Top Products
74
Recording – Advanced Operations
Chapter 3 Recording and Playback
Recording with the Clip Continuous
Rec Function
Normally, a clip is generated as an independent file every
time recording starts and stops. The Clip Continuous Rec
function allows you to continue recording to the same clip
until the function is turned off, regardless of how many
times recording starts and stops. This is convenient if you
want to avoid generating a large number of short clips, or
if you want to record without worrying about the limit on
the number of clips (maximum 300). A REC START
essence mark is recorded whenever recording starts, which
makes it easy to find the recording start points.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Set CLIP CONT REC on the SPECIAL EFFECTS
page of the OPERATION menu to ON.
For details on menu operations, see “Basic Menu
Operations” (page 129).
2
Select CLIP CONT REC, and press the MENU knob.
3
Press the MENU knob.
The VDR operation indicator in the viewfinder
changes to “CONT”, and the Clip Continuous Rec
function is enabled.
The Clip Continuous Rec ON/OFF function can be
assigned to the ASSIGN 1/2/3/4 switches.
See “Assigning Functions to ASSIGN Switches” (page
141) for more information about the ASSIGN switches.
The following recording modes cannot be enabled when
this function is enabled.
• Interval Rec function
• Picture Cache function
To stop the function
Do one of the following to stop the Continuous Rec
function. (A new clip will be generated the next time you
start recording.)
• Perform a clip operation (lock or delete a clip)
• Make a network or FAM connection
• Eject the disc
• Change the recording format. (The unit responds as
follows. If the FIND MODE on the ESSENCE MARK
page of the MAINTENANCE menu is set to CLIP, the
unit moves from the current position to the next clip. If
it is set to R.ST, the unit moves from the current position
to the next REC START essence mark.)
• Power the unit off
To turn the function off
Set CLIP CONT REC on the SPECIAL EFFECTS page of
the OPERATION menu to OFF.
Note
002 SPECIAL EFFECTS TOP
SLOW&QUICK : OFF
FRAME RATE : 30P
CLIP CONT REC : ON
INTERVAL REC : ON
INTERVAL TIME : 1SEC
NUMBER OF FRAME : 1F
NUMBER OF TIMES : CONT
PRE-LIGHTING : OFF
PICTURE CACHE : OFF
CACHE REC TIME : 8-10s