Filter
Top Products
70
Recording – Advanced Operations
Chapter 3 Recording and Playback
Setting the title prefix
You can assign title prefixes by choosing from a prefix list
stored in internal memory, or by entering the prefix
directly.
However, to choose from a prefix list, you must create the
list beforehand on a computer and transfer it to the unit’s
internal memory with a “Memory Stick”.
Setting the initial value of the serial number
The initial value of the serial number can be set to 00001
(the default) or to any other number. The number is
automatically incremented by 1 each time you record a
clip. When it reaches 99999, it returns to 00001 for the
next clip.
Duplicate clip titles can be generated depending on the
serial number setting, for example if you reset the serial
number to the original value after recording several clips.
Care should be taken when setting the serial number.
To assign user-defined titles automatically
when clips are recorded
On the CLIP TITLE page of the OPERATION menu, set
TITLE to ENABL.
For details on menu operations, see “Basic Menu
Operations” on page 129.
The following items appear.
Clip titles will be generated automatically if you record in
this state.
The title of the next clip to be recorded will be a
combination of the prefix in the PREFIX field and the
serial number in the NUMERIC field.
To use any alphanumeric character string, see the
following.
To enter a title prefix directly
Proceed as follows.
1
On the CLIP TITLE page, select “PREFIX” and then
press the MENU knob.
A prefix string appears.
2
Move the x mark to the character you want to change
and then press the MENU knob.
3
Turn the MENU knob to move the x mark to the
desired character in the list of selectable characters,
and then press the MENU knob.
4
Repeat steps 2 and 3 to enter the remaining characters.
5
When you have finished entering the prefix, turn the
MENU knob to move the x mark to END, and then
press the MENU knob.
The camcorder exits prefix input mode, and the
original CLIP TITLE page appears.
To set the initial value of the clip title serial
number
You can set the initial value of the clip title serial number
to 00001 (default) or to any five-digit value.
To return the initial value to 00001
Proceed as follows.
1
On the CLIP TITLE page, select “CLEAR
NUMERIC” and then press the MENU knob.
The message “CLEAR OK? YES b NO” appears.
2
Select YES and then press the MENU knob.
The value in the “NUMERIC” field returns to “00001”
(default).
To set the initial value to any number
Proceed as follows.
1
On the CLIP TITLE page, select “NUMERIC” and
then press the MENU knob.
A digit selection screen appears.
Note
C0017.MXF
TITLE00037
C0002.MXF
TITLE00022
TITLE00021
C0001.MXF
Clips recorded on Disc 2
005 CLIP TITLE TOP
CLIP TITLE : ENABL
TITLE : EXEC
SELECT PREFIX : EXEC
CLEAR NUMERIC : EXEC
LOAD PREFIX DATA: EXEC
PREFIX : EXEC
NUMERIC : EXEC
005 CLIP TITLE TOP
CLIP TITLE : ENABL
TITLE : EXEC
SELECT PREFIX : EXEC
CLEAR NUMERIC : EXEC
LOAD PREFIX DATA: EXEC
PREFIX : EXEC
!#$%&'()+,-.0123456789;
=@ABCDEFGHIJKLMNOPQRSTUV
WXYZ[]^_abcdefghijklmnop
qrstuvwxyz{}~
INS DEL RET ESC END