Filter
Top Products
78
Thumbnail Search
Chapter 3 Recording and Playback
3
Use the SEL/SET button or the MENU knob to select
the information to display from among the following,
and then press the button or knob.
• DATE: Date of recording
• TIME CODE: Start timecode
• DURATION: Whole length of clip
• SEQUENCE NUMBER: Thumbnail sequence
number
The information displayed on the lower side of
thumbnails changes according to the item selected.
Example: When “SEQUENCE NUMBER” is selected
Some characters in clip names, clip list names, and titles
may be converted to “s” characters for display in the
thumbnail screen and CLIP menu. For details, see page 72.
Changing the Thumbnail Image
(Index Frame) of a Clip
In the thumbnail screen, normally the first frame of a clip
is displayed as the index frame.
To change this to show a different frame, proceed as
follows.
You can also select (at 1-second intervals) a frame within
10 seconds of the first frame as the thumbnail image of the
clip at the time when you record a clip with this unit. For
details, see page 65.
1
With the thumbnail screen displayed, hold down the
SHIFT button and press the SEL/SET button to the
bottom side (the CLIP MENU side).
The CLIP menu appears (see page 95).
2
Use the SEL/SET button or MENU knob to select
“SET INDEX PICTURE”, and then press the button/
konb.
This switches to the screen for selecting a clip for
changing the index frame.
3
Select the desired thumbnail, and press the SEL/SET
button or MENU knob.
The frame from the clip that is currently specified as
the thumbnail is displayed. In this state, you can use
playback or search.
4
Using playback or search, find the new index frame.
You can also turn the MENU knob for a jog operation.
5
Press the SEL/SET button or MENU knob.
This sets the selected scene as the index frame, and
returns to the thumbnail screen.
When the thumbnail is other than the first frame, this
is shown as follows.
If you select a marked thumbnail, and press the SEL/SET
button or MENU knob, this does not cue up to the
thumbnail position. Cuing up is always to the first frame of
the clip.
To cancel setting the index frame, hold down the SHIFT
button and press the SEL/SET button down (CLIP
MENU).
Note
Note
Thumbnail sequence number
Note
Mark indicating that the
thumbnail is not the first frame