Filter
Top Products
Connecting the Camera to a Network
30
Connection Using an xDSL Modem
1
Select xDSL (PPPoE) in the setup program or
select xDSL on Select Network Interface on the
Network Setting page for the Administrator, and set
the items for the xDSL modem connection.
For details on the settings, see “xDSL Interface” on
page 18.
For the use of the setup program, see “Assigning the
IP Address Using the Setup Program” in the
supplied Installation Manual.
2
Connect the camera to the network as follows:
Notes
• For details on the xDSL modem connection, refer to
the operation manual of the modem.
• For required connection settings, check with your ISP.
Connection Using a USB Modem
1
Select PSTN in the setup program or select PSTN
on Select Network Interface on the Network Setting
page for the Administrator, and set the items for the
USB modem connection.
For details on the settings, see “PSTN Interface” on
page 18.
For the use of the setup program, see “Assigning the
IP Address Using the Setup Program” in the
supplied Installation Manual.
2
Connect the camera to the network as follows:
Notes
• For details on the USB modem connection, refer to the
operation manual of the modem.
• For required connection settings, check with your ISP.
AC power adaptor
(supplied)
Power cord
(supplied)
to an AC outlet
Ethernet cable
(not supplied)
xDSL Modem
Network
DC IN
12 V
10BASE-T
10BASE-T
SNC-VL10N/VL10P
AC power adaptor
(supplied)
Power cord
(supplied)
to an AC outlet
USB cable
(not supplied)
USB Modem
Network
DC IN
12 V
USB
MODEM
USB
SNC-VL10N/VL10P