Filter
Top Products
Others
Connecting the Camera to a Network
31
Connection Using IEEE802.3af
Compliant Power Supply
Equipment
This camera conforms to the IEEE802.3af standards to
supply the power via the Ethernet cable. To supply the
power to the camera, connect it to a network using the
IEEE802.3af compliant power supply equipment.
1
Select Ethernet in the setup program or select
LAN on Select Network Interface on the Network
Setting page for the Administrator, and set the items
for the LAN connection.
For details on the settings, see “LAN” on page 17.
For the use of the setup program, see “Assigning the
IP Address Using the Setup Program” in the
supplied Installation Manual.
2
Connect the camera to the network as follows:
Note
For details on the IEEE802.3af compliant power supply
equipment connection, refer to the operation manual of
the equipment.
Ethernet cable
(not supplied)
IEEE802.3af
compliant power
supply equipment
Network
10BASE-T
10BASE-T
SNC-VL10N/VL10P
Sony Corporation