Filter
Top Products
Monitoring the Image from the Camera
8
Image Control Section
Image Size
Selects the image size.
See “Selecting the image size” on page 9.
Expansion
Selects the image expansion ratio.
See “Expanding the image” on page 9.
Frame Rate
Selects the frame rate to transmit images.
See “Selecting the frame rate” on page 9.
Note
An approximate frame rate is displayed on the status bar
located on the bottom of the Web browser. This does not
indicate the exact frame rate.
Monochrome
Select this check box to display the image in
monochrome.
See “Displaying the monitor image in monochrome” on
page 10.
Singleshot
Select this check box to freeze the monitor image.
See “Freezing the monitor image” on page 10.
Capture
Click to capture the monitor image.
See “Capturing the monitor image” on page 10.
Sensor 1
Click to output an alarm from sensor output 1 of the
Sensor I/O port on the camera.
See “Outputting an Alarm” on page 10.
Sensor 2
Click to output an alarm from sensor output 2 of the
Sensor I/O port on the camera.
See “Outputting an Alarm” on page 10.
Note
Sensor 1 and Sensor 2 are disabled for the users whose
access right is None.
Logon User
Displays the number of users currently accessing this
camera.
Location
Displays the location of the camera.
For setting the location, see “Configuring the System —
System Setting Page” on page 14.
Comment
Displays the comment.
For setting the comment, see “Configuring the System
— System Setting Page” on page 14.
Monitoring the Image
from the Camera
About Viewers
The Network Camera uses Wavelet algorithm to
compress and transmit images. Therefore, in order to
view images from the camera, you need to download
Active-X Control or a viewer plugin depending on your
Web browser and/or OS.
Using the Internet Explorer
Active-X Control is necessary. When you log in the
camera using the Internet Explorer for the first time, the
Active-X Control is automatically downloaded. The
monitor image automatically appears when you enter
the Main Viewer page.
Using the Netscape Navigator Ver. 4.7
You need to download the plugin for Netscape
Navigator stored in the camera. When you log in the
camera using Netscape Navigator for the first time, the
“Plugin Download” page appears. Click Download
SNC-VL10 Plug-in Now! and follow the instructions
on the screen.
Plugin Download page