Filter
Top Products
92
For details on the operation
1
page 80
To mark all the images
1 Select [All on card] in [ DPOF set].
2 Select the number of sheets with v/V on the controller (increases with v and decreases with V).
You cannot separately set the number of images.
3 Press the center of the controller.
A (DPOF set) mark appears on all the images, and the screen returns to the menu screen.
• When a DPOF-marked image is played back, and its number are inserted onto the image.
• If you insert a recording medium that contains DPOF-marked images specified with other cameras into
this camera, then specify images to which to attach a DPOF-mark, the DPOF specifications made with
other cameras are canceled.
You can impose the date onto images when printing images. The position of the date (inside or
outside the image, character size, etc.) depends on your printer.
• Normally, only the date is inserted, however, imposed items may be different depending on the printer.
This function may not be provided, depending on the printer.
You can create an index print of all the images in the folder (Index print). This camera can
specify an index print, as well as frame by frame printing.
• The number of images to print on a sheet and the format depend on the printer. RAW images do not print
in index print.
• The images you shot after setting the index print are not included in the index print. It is recommended
that you create the index print just before printing it.
You can clear the (DPOF) marks. When you do so, the index print is also canceled. Since
the (DPOF) marks are left on after printing, it is recommended that you just clear the
marks.
1 Select [Enter] in [Cancel print].
The message “Cancel all?” appears.
2 Select [Yes] with b on the controller, then press the center of the controller.
The (DPOF) marks of all the images are cleared.
Date imprint
On
Imposes the date.
Off
Does not impose the date.
Index print
On
Specifies an index print.
Off
Does not specify an index print.
Cancel print