Filter
Top Products
12
, Connect the power cord (mains
lead) to the AC power adaptor
and then to a wall outlet (wall
socket).
The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.
• After charging the battery pack, disconnect the
AC power adaptor from the DC IN jack of your
camera.
To remove the battery pack
Open the battery/“Memory Stick” cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator on the screen
shows the remaining shooting or viewing time.
• The displayed remaining time may not be
correct under certain circumstances or
conditions.
• When you switch the FINDER/LCD switch, it
takes about one minute for the correct battery
remaining time to appear.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-L10A/
L10B AC power adaptor at a temperature of 25°C
(77°F).
4
Power cord
(mains lead)
AC power adaptor
2 To wall outlet (wall socket)
1
/CHG lamp
Battery eject lever
Battery pack
Charging time
(min.)
NP-FM50 (supplied) Approx. 150
2560
6
60min
101