Filter
Top Products
56
NightShot
The NightShot function lets you shoot
subjects in dark places such as camp scenes
at night or nocturnal plants and animals.
a Set the mode dial to , or
.
b Set NIGHTSHOT/
NIGHTFRAMING switch to
NIGHTSHOT.
The and “NIGHT SHOT”
indicators light. The “NIGHT SHOT”
indicator turns off after 5 seconds.
c Shoot the image.
To cancel the NightShot function
Set NIGHTSHOT/NIGHTFRAMING
switch to z.
• While using the NightShot function, you cannot
use the following functions:
– White balance
– Switching the metering mode
– AE LOCK
– Shooting with hologram AF
– Shooting with the flash
• Do not use the NightShot function in bright
places (e.g. outdoors in the daytime). This may
cause your camera to malfunction.
• Images do not appear with the correct colors
while shooting with the NightShot function.
• If focusing is difficult with the auto focus mode
when using the NightShot function, adjust
focus manually (page 48). The focus distance
value does not appear.
• If you press an invalid key while using the
NightShot function, the indicator flashes,
and the “NIGHT SHOT” indicator lights for
about 5 seconds.
However, if you select the flash mode in
Bracket, Multi Burst or BURST 3 mode, the
BRK/ / indicator flashes.
NightFraming
The NightFraming function enables you to
check a subject even at night and then
record with natural colors using the flash.
a Set the mode dial to , or
(Clip Motion).
b Set NIGHTSHOT/
NIGHTFRAMING switch to
NIGHTFRAMING.
The and “NIGHT FRAMING”
indicators light. The “NIGHT
FRAMING” indicator turns off after
about 5 seconds.
c Press and hold the shutter
button halfway down.
The hologram AF light (page 27) is
emitted and the focus is automatically
adjusted.
d Press the shutter button fully
down.
The shutter sounds, the flash strobes
and the image is recorded.
640
4
101
“NIGHT SHOT”
640
4
101
“NIGHT FRAMING”