Filter
Top Products
28
Inserting the date and time on a still image
, Set the mode dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
superimposed, the date and time cannot be
removed later.
• The date and time do not appear on the screen
during shooting, instead, “ ” appears in the
upper left corner of the screen. The actual date
and time appear during playback only.
, Select 1 (CAMERA 1) with v
on the control button, then
press B.
Select [DATE/TIME] with v/V,
then press B.
• If you select [DATE], the date is superimposed
onto the image in the order selected in “Setting
the date and time” (page 16).
, Select the date and time setting
with v/V on the control button,
then press z.
DAY & TIME: Superimposes the date,
hour, and minute onto the image.
DATE: Superimposes the year, month and
day onto the image.
OFF: Does not superimpose the date and
time onto the image.
After the setting has been completed, set the
mode dial to , and shoot the image.
• You can also shoot images with the mode dial
set to
, S, A, M or SCN.
• This setting is maintained even when the power
is turned off.
CAMERA 1
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
RED EYE REDUCTION :
HOLOGRAM AF :
CONVERSION LENS :
SELECT
1
1
2
MPEG MOVIE
OFF
ON
OFF
AUTO
OFF