Filter
Top Products
21
Getting Started
Set the date and time when you use your camcorder for the first time. Set the
geographical area, then the daylight savings time, the year, the month, the day, the hour
and then the minute, in that order.
If you do not use your camcorder for about 3 months, the date and time settings may
be cleared from memory (bars may appear) because the built-in rechargeable battery in
your camcorder will have been discharged during that time. In that case, charge the
built-in rechargeable battery by connecting the AC adaptor, and set the date and time
again (page 16, 132).
1 Open the LCD screen while pressing OPEN.
2 Turn the power on by sliding the POWER switch upward while pressing the
green button.
The CLOCK SET display appears.
3 Select the desired geographical area with v/V, and press ENTER.
Step 4 Setting the date and time
POWER switch
b/v/V/B/ENTER buttons
SETUP button
[ ENTER ] : NEXT ITEM
AREA 26
DST OFF
DATE Y M D
-5.0GMT
New York,Bogota
CLOCK SET
:
[ ENTER ] : NEXT ITEM
AREA 26
DST
DATE Y M D
-5.0GMT
New York,Bogota
CLOCK SET
:
OFF
ON