Filter
Top Products
39
Shooting movies/still images
Shooting movies/still images
To shoot images continuously (BURST, DCR-DVD200/DVD300 only)
You can record still images continuously by setting [BURST] beforehand.
It takes about 10 seconds to record the continuous images on the disc. You cannot shoot
still images while the camera is recording.
NORMAL [a]
Your camcorder shoots up to 4 still images in 1152 × 864 size or 12 still images in
640 × 480 size at about 0.6 sec intervals. ( )
EXP BRKTG (Exposure bracketing) [b]
Your camcorder automatically shoots 3 images at about 0.6 sec intervals at different
exposures. ( )
1 Set the mode dial to (Still).
2 Press SETUP.
3 Select (CAMERA SET) with v/V, then press ENTER.
4 Select [BURST] with v/V, then press ENTER.
[a]
[b]
[ SETUP ] : END
SELFTIMER
BURST
QUALITY
OFF
N. S. LIGHT
RETURN
IMAGESIZE
CAMERA SET
[ SETUP ] : END
SELFTIMER
BURST
QUALITY
OFF
NORMAL
EXP BRKTG
N. S. LIGHT
RETURN
IMAGESIZE
CAMERA SET
[ SETUP ] : END
PROGRAM AE
FLASH MODE
FLASH LVL
WHT BAL
MANUAL SET