Filter
Top Products
43
Shooting movies/still images
Self-timer recording
You can also use the Remote Commander for
this operation.
On shooting movies
1 Set the mode dial to (Movie).
2 Press SETUP.
3 Select (CAMERA SET) with v/V, then
press ENTER.
4 Select [SELFTIMER] withv/V, then press
ENTER.
5 Select [ON] with v/V, then press ENTER.
6 Press SETUP.
The SETUP display disappears from the
LCD display and the (self-timer)
indicator appears.
7 Press START/STOP.
Self-timer starts counting down with a
beep. In the last 2 seconds of the
countdown, the beep gets faster, then
recording starts automatically 10 seconds
after pressing START/STOP.
Tip
To stop the countdown, press START/STOP.
To restart the countdown, press START/STOP
again.
Shooting with the subject
checking the image
– Mirror mode
The picture on the LCD display is a mirror-
image. However, the picture will be normal
when recorded.
1 Set the mode dial to (Movie) or
(Still).
2 Extend the viewfinder.
3 Open and rotate the LCD screen 180
degrees.
The indicator appears in the
viewfinder and on the LCD display.
When the mode dial is set to
(Movie), Xz appears in the standby
mode, and z appears in the recording
mode. Some indicators appear mirror-
reversed and others are not displayed.
Note
The viewfinder automatically turns off when
using the LCD display, except in the mirror
mode.
Shooting techniques to match your circumstances
PHOTO button
START/
STOP
button
2
3
[ SETUP ] : END
SELFTIMER
D ZOOM
16 : 9WIDE
N. S. LIGHT
RETURN
STEADYSHOT
CAMERA SET
OFF
ON
SETUP button