Sony DCR-PC330E Camcorder User Manual


 
3
GB
Notes on the LCD panel, viewfinder, and
lens
The LCD screen and the viewfinder are
manufactured using extremely high-precision
technology, so over 99.99% of the pixels are
operational for effective use.
However, there may be some tiny black points and/
or bright points (white, red, blue, or green in color)
that appear constantly on the LCD screen and the
viewfinder.
These points are normal results of the manufacturing
process and do not affect the recording in any way.
Exposing the LCD screen, the viewfinder, or the lens
to direct sunlight for long periods of time may cause
malfunctions. Be careful when placing the camera
near a window or outdoors.
Do not aim at the sun. Doing so might cause your
camcorder to malfunction. Take pictures of the sun
only in low light conditions, such as at dusk.
Note on connecting other device
Before connecting your camcorder to other device
such as a VCR or a computer with a USB or i.LINK
cable, be sure to insert the connector plug in the proper
direction. If you insert the connector plug forcibly in
the wrong direction, the terminal may be damaged, or
this may cause a malfunction of your camcorder.
Note on using this manual
The images of the LCD screen and the viewfinder used
on this manual are captured using a digital still camera,
and thus may appear different from what you see.
Notes on using the camcorder
Hold your camcorder correctly.
To ensure a good grip, lower the finger rest and
fasten the grip belt as shown in the following
illustration.
When you are using the touch panel, place your hand
on the back side of the LCD panel to support it.
Then, touch the buttons displayed on the screen.
You can change the language to be used for screen
display on your camcorder (p. 22).
Do not hold the camcorder by the following parts.
Touch the button on the LCD screen.
Viewfinder
LCD panel
Battery pack
Flash