Filter
Top Products
Using the Menu
80
NTSC PB
When you play back an NTSC color system video, select the available system of
your TV to play back the video with.
z Tip
• When you play a tape back on a Multi System TV, select the best mode while you are
viewing the picture on the TV.
DATA CODE
REMAINING
REMOTE CTRL
b Note
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
REC LED
GON PAL TV Select to play the video back on a PAL system TV.
NTSC 4.43 Select to play the video back on a TV with an NTSC 4.43 mode.
GOFF Select not to display date, time and the camera settings data during
playback.
DATE/TIME Select to display the date and time during playback (p. 51).
CAMERA DATA Select to display the camera settings data during playback (p. 51).
GAUTO Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch (play/pause).
ON Select to always display the remaining tape indicator.
GON Select when using the Remote Commander supplied with your
camcorder.
OFF Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
GON Select to turn on the camera recording lamp on the front of your
camcorder during recording.