Filter
Top Products
106
(Disc Tool 2)
(Setup 1)
(Setup 2)
2
Item Setting Description
File Number
xSeries
Reset
– Assigns numbers to files in sequence even if the disc is changed or the recording folder is
changed.
– Resets the file numbering and starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the largest number is assigned.)
Create REC. Folder OK / Cancel Creates a folder for recording images (page 42).
Change REC. Folder OK / Cancel Changes a folder for recording images (page 42).
Confirm B. Write On /
xOff Selects whether to confirm recording or deletion of the image before writing to the disc
(page 57).
Item Setting Description
LCD Brightness Bright / xNormal / Dark Selects the LCD brightness. This has no effect on the recorded images.
LCD Backlight Bright /
xNormal Selects the brightness of the LCD backlight. Selecting [Bright] makes the screen bright and easy
to see when using the camera outdoors or in other bright locations, but also uses up the battery
charge faster. Displayed only when using your camera with the battery pack.
Beep Shutter
xOn
Off
– Turns on the shutter sound. (The shutter sound is heard when you press the shutter button.)
– Turns on the beep/shutter sound when you press the control button/shutter button.
– Turns off the beep/shutter sound.
Language
— Displays the menu items, warnings and messages in selected language.
Clock Set OK / Cancel Sets the date and time (pages 16 and 40).
1
A
2
Item Setting Description
Video Out NTSC
PAL
– Sets the video output signal to NTSC mode (e.g., USA, Japan).
– Sets the video output signal to PAL mode (e.g., Europe).