Filter
Top Products
97
Troubleshooting
Not enough battery • The battery level is too low to execute initialization or finalization.
E • The battery level is low. Charge the battery pack
(page 11). Depending on the conditions of use, the indicator may
flash even though there is still 5 to 10 minutes of remaining battery time left.
Can not unfinalize • A CD-R or disc that has not been finalized is inserted.
Can not format • A CD-R is inserted.
Format error • A disc formatted with equipment other than your camera is inserted. Format again with your camera
(page 38).
Turn the power off and on
again
• A problem with the lens caused an error.
• The amount of light is not sufficient, so you are not holding the camera steady enough. Use the flash, or mount the
camera on a tripod or otherwise secure the camera in place.
Message Meaning/Corrective action