Filter
Top Products
95
Troubleshooting
Others
Symptom Cause Solution
Your camera does not
work.
• You are not using an “InfoLITHIUM” battery
pack.
• The battery level is low. (The E indicator
appears.)
• The AC Adaptor is not connected securely.
pUse an “InfoLITHIUM” battery pack (page109).
pCharge the battery pack (page 11).
pConnect it securely to the DC IN jack of your camera and to a
wall outlet (page 14).
The power is on, but the
camera does not work.
• The built-in microcomputer is not working
properly.
pDisconnect, and then, after one minute, reconnect all power
sources and turn on the camera. If this does not work, press the
RESET button on the bottom of the camera using a fine-tipped
object, then turn on the power again. (All the settings including
date and time are cleared.)
You cannot identify an
indicator on the screen.
— pCheck the indicator (page 113).
The lens gets fogged. • Moisture condensation has occurred. pTurn off the camera and leave for about an hour at room
temperature for the moisture to evaporate before use (page 108).
A file error occurs when
you play back a file.
• The image file has an error.
• The image was not recorded correctly.
• The disc is dirty
• The disc may be scratched.
—
—
pClean the disc (page 108).
pReplace the disc.