Filter
Top Products
TOSHIBA
6
INTRODUCTION
Thank you for purchasing the 1600EP Series UPS. This Series features a liquid crystal display along
with the very latest state of-the-art microprocessor technology and IGBT transistors for fast, high
power and low noise PWM (pulse width modulation) switching. The 1600EP Series features a low
impedance output transformer to provide total power conditioning and noise isolation even during
static bypass operation.
It is the intent of this manual to provide a guide for installing, operating, and maintaining the UPS.
Please read this manual thoroughly before installation and operation. All warnings and
precautions should be observed for personal safety, for proper equipment performance, and for
longevity.
Read the important safety instructions on pages 8 and 9. Save these safety instructions for future
reference.
Product description and application information can be found starting on page 10. Initial equipment
inspection, storage, installation and operating precautions start on page 11.
Information about the equipment's electrical connections and communication interfaces begin
on page 13. The equipment specifications for both standard and isolated models begin on page 18.
Battery backup time, recharging, low voltage tolerances, alarm and panel indicator functions
are just a few of the functions mentioned in 'Operating the UPS' that begins on page 22.
The liquid crystal display (LCD), front panel layout, light emitting diode (LED) display, and the
startup and data screen explanations begin on page 27.
The system protection features begin on page 42.
The preventive maintenance and/or periodic parts replacement recommendations along with front,
rear, and side panel layout views, dimensional data and shipping weights are also shown starting
on page 44.
TOSHIBA INTERNATIONAL CORPORATION