Filter
Top Products
16
Changing the setting in E.TRG mode(1. 3)
The E.TRG has five modes; 1P SNR, 1P SR, PW SNR, PW SR, RR.
First move the “
” to MODE and select E. TRG, then move the “ ” to E.TRG and select the desired E.TRG mode.
Changing the setting in 1P SNR mode( 1.3. 1)
SHUTTER
SHUTTER
MODE E.TRG
E.TRG 1P SNR
TRG.P
EXP. 30ms
OUT.P OFF
<MODE = E.TRG E.TRG = 1P SNR>
• E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
0.01 ms 0.02 ms 0.4 ms 1 ms 20 ms 30 ms
0.01 ms
step
0.02 ms
step
0.1 ms
step
1 ms
step
2 ms
step
• Input trigger pulse setting at 1P SNR and 1P SR
Input trigger pulse : positive polarity
• Exposure time setting at 1P SNR and 1P SR
• Shutter mode MANU, SS, E.TRG, AUTO
Input trigger pulse : negative polarity
Move up down
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
• Partial scanning switchPART switch
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
(a) Changing the polarity of the input trigger pulse setting
Move the “
” to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
Select either
, by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing 1P SNR exposure time setting
Move the “
” to EXP. by pushing [MENU UP], [MENU DOWN] buttons.
Select the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
(c) Changing the partial scanning setting
Move the “
” to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
Move “
” to the current value by pushing [MENU UP], [MENU DOWN] buttons.
Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
120730c1_IK_TF7P2_EN.indd 16 12.7.30 1:19:01 PM