Filter
Top Products
18
ChangingthesettinginPWSNRmode( 1.3. 3)
MODE E.TRG
E.TRG PW SNR
TRG.P
OUT.P OFF
SHUTTER
<MODE = E.TRG E.TRG = PW SNR>
• E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at PW SNR and PW SR
• Shutter mode MANU, SS, E.TRG, AUTO
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
Move up down
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
• Partial scanning switchPART switch
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
(a) Changing the polarity of the input trigger pulse setting
Move the “
” to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
Select either
, by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing the partial scanning setting
Move the “
” to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
Move “
” to the current value by pushing [MENU UP], [MENU DOWN] buttons.
Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras
become: fixed pattern noise, white pixels, etc.
120730c1_IK_TF7P2_EN.indd 18 12.7.30 1:19:01 PM