Toshiba IK-TF7P2 Security Camera User Manual


  Open as PDF
of 40
 
29
PWSNR(PulsewidthtriggerSYNC-NONRESET)( 3 )
The trigger input to CC1 of the DIGITAL terminal develops 1 frame images.
PulseWidthTriggerSYNC-NONRESETPictureOutputTiming(3. 1)
External VD IN*
1
External HD IN*
1
About 1H
Negative polarity mode
Positive polarity mode
FVAL
The internal VD falling edge is within the
exposure period and thus video is not output.
*
3
About 1 µs
About 7 µs
Exposure period*
2
Exposure period*
2
Trigger*
1
(Internal VD)
RGB data
(video interval image)
LVAL,
DVAL
28H Partial scanning OFF
25H Partial scanning 40fps
27H Partial scanning 42fps
33H Partial scanning 50fps
39H Partial scanning 60fps
43H Partial scanning 70fps
46H Partial scanning 80fps
48H Partial scanning 90fps
*
4
*1: External input signal
*2: Exposure time = Trigger pulse width + 6 µs
(Valid trigger pulse width is 2 µs or greater for external trigger shutter operation.)
*3: Video is output at the falling edge of the internal VD following completion of the exposure period.
The video and FVAL/LVAL/DVAL have a paired relationship.
*4: When NR is set to ON, 1H is increased.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trigger, there
will be an effect on the video.
120730c1_IK_TF7P2_EN.indd 29 12.7.30 1:19:04 PM
 previous next