Filter
Top Products
28
1P SR (1 Pulse Trigger Sync Reset)( 2 )
Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, the vertical sync signal is reset
and frame images are output.
1 Pulse Trigger SYNC-RESET Picture Output Timing(2. 1)
About 1 µs
Exposure completion
0 to 1H*
3
Exposure period*
2
Trigger*
1
Negative polarity mode
Positive polarity mode
(Internal VD)
FVAL
RGB data
(video interval image)
LVAL,
DVAL
28H Partial scanning OFF
25H Partial scanning 40fps
27H Partial scanning 42fps
33H Partial scanning 50fps
39H Partial scanning 60fps
43H Partial scanning 70fps
46H Partial scanning 80fps
48H Partial scanning 90fps
*
4
*1: External input signal
*2: Exposure time is determined by the setting of “7. 2 (1.3) Changing each setting in E.TRG mode”.
*3: VD is generated after 0 to 1H following the completion of the exposure period and the video is synchronized to
this and output.
*4: When NR is set to ON, 1H is increased.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trigger, there
will be an effect on the video.
120730c1_IK_TF7P2_EN.indd 28 12.7.30 1:19:03 PM