TRENDnet TVIP612P Security Camera User Manual


 
TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera
7
Rear Panel Components
The power connection to the camera when fitted with the Infrared lens is split between the camera
body and lens using the power connection adapter cable attached to the infrared lens. All other
cables connect to the camera at the rear panel.
`
Rear Panel view of TV-IP612P/W
WPS
Press this button to enable Wireless Protected Setup so that you can
automatically connect with a WPS enabled wireless device such as a
router or access point.
Power receptacle
Connect power adapter shipped with the camera and plug into suitable
power source.
Ethernet Port
Connect to Ethernet LAN. The port is auto MDI-II/MDI-X and auto-
negotiation for port speed.
IO Connectors
This terminal block has one input pair and one output pair of pins to
connect external input/output devices.
AV Out / Speaker
Out
Connect this Audio/Video output jack with the supplied cable so that you
can view or record the live video feed on a local TV or VCR. You can also
connect audio to a local speaker for local audio reproduction.
Antenna (TV-
IP612WN only)
Power
Ethernet
Port
Reset button
IO
Connectors
AV OUT
Microphone
WPS (TV-
IP612WN only
Antenna (TV-
IP612WN only)