Filter
Top Products
TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera
48
FTP Settings
FTP Server: Check this option to send the image captured to a FTP server.
User Name: The account user name assigned and used for accessing the FTP server.
Password: The password used for the account username configured above.
Host Name: The FTP server’s hostname or IP address. For example: ftp.trendnet.com.
Path: The FTP server file system path to the directory where the image is uploaded to. For
example: \TV-IP612P
Filename Prefix: Use this field to configure a prefix added to the front of the filename used for
each image.
Port: The FTP server port address normally set to the default of 21.
Interval: The interval time between images (snapshots) taken for the continuous or scheduled
mode.
Passive Mode: Check this option if the FTP server configured is setup for passive mode clients.
An FTP server setup in passive mode uses random ports for the file transfer.
Preset Position
Presets allow you to program a home camera view and programmable positions and save them for
future viewing and recording.
Camera Control
Set as Home: Clicking this button sets the Home
postion to the current view.
Default Home: Clicking this button sets the home
position of the camera view to the default factory
programmed position.
Pan Speed: Use this drop-down configuration to
set the camera panning speed from 1 to 10 where
10 is the fastest panning speed.
Tilt Speed: Use this drop-down configuration to set
the camera tilt speed from 1 to 10 where 10 is the
fastest tilt speed.
Current Postion: Type a name to use for the
current camera view you would like to save as a
preset position. Then click the Add button to save
it.