Filter
Top Products
TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera
44
Shutter Mode (Shutter-preferred)
• Select Auto to have the camera shutter-speed be automatically set.
• Select Manual to adjust the shutter-speed of the camera using the Shutter Value settings in
the below pull-down menu
• Select Anti-Flicker to remove the flicker caused by indoor lighting of the image.
Shutter Value: Select the desired shutter speed (in seconds) of the camera when the Shutter
Mode setting is set to Manual.
White Balance: Adjust the level of White Balance so that white objects in the image appear with
the correct white color.
• Select Manual to use the Red and Blue Offset adjustment settings to the right.
• Select Indoor to automatically adjust the White Balance for indoor imaging.
• Select Outdoor to automatically adjust the White Balance for outdoor imaging.
RedOffset: Adjust the Red Level percentage of the image when White Balance is set to Manual.
BlueOffset: Adjust the Blue Level percentage of the image when White Balance is set to Manual.
Deinterlace: Click this box to change the video format from interlaced to progressive.
Wide Dynamic Range: Click this box to adjust the camera settings automatically to increase the
visibility and clarity of the brightest and darkest parts of the image.
Reset to Default: Click this button to reset to the factory default video image settings
ICR
The Infrared Cut Removeable (ICR) controls the
operation of the ICR filter for changing light
conditions such as from Day to Night. This section
provides options to control the operation of the ICR
filter.
Automatic: In automatic mode the camera will
automatically enable or disable the ICR filter
depending on the light conditions.
Day mode: If the camera is used only in a bright and well lit area, please select this option.