Filter
Top Products
Digital Camera >>
EN-68
Setup Menu (Basic tab)
In the setup menus you may adjust your ViviCam 8300s’s operating
environment. The settings will be retained after the power has been turned
off or Auto Power Off is activated.
1. Slide the mode switch to [
] and set the
mode dial to [
].
The [Basic] tab of the set-up menu is
displayed.
2. Select the desired [Basic] option item with
the S/T buttons, and press the SET
button to enter its respective menu.
3. Select the desired setting with the S/T
buttons, and press the SET button.
4. To exit from the set-up menu, change
the mode dial setting.
Card Info.
This will display the total capacity of your memory card as well as the
remaining (unused) capacity. Note that the stated capacity may be less
than the advertised (labeled) capacity of your SD memory card. This is
attributable to the difference between binary (base 2) and engineering
(base 10) methods of capacity calculation.
Fr. No. Reset
This creates a new folder on your memory card. From this point forward,
newly captured images are stored in the newly created folder starting with
image number 0001.
* Cancel / Execute
USB
PC