Filter
Top Products
Digital Camera >>
EN-82
TROUBLESHOOTING
Refer to the symptoms and measures listed below before sending the
ViviCam 8300s for repairs. If the problem persists, contact your local reseller
or service center.
Power Supply
Symptom
The power does not
come on.
The power cuts out
during use.
The power does not
go off.
The battery runs
out quickly.
The battery or
ViviCam
8300s
feels warm.
Cause
The battery is not loaded.
The battery is exhausted.
The AC power adaptor is not
connected correctly.
The camera was left
unattended and unused, so the
auto power off cuts it off.
The battery is exhausted.
ViviCam 8300s malfunction.
It is being used in extreme low
temperature.
Many shots are being captured
in dark places inside, requiring
flash.
The battery is not fully charged.
The battery is not used for an
extended period of time after
charged.
Long period of continuous use
of the
ViviCam 8300s or the flash.
Measure
Load the battery correctly.
Recharge or use the AC power
adapter.
Reconnect it properly.
Turn the power back on.
Recharge or use the AC power
adapter.
Reload the battery. If using the
AC power adapter, reconnect it.
Fully charge the battery and
discharge it for at least one
complete cycle before use to
maximize its performance and
lifetime.