Filter
Top Products
User’s Manual >>
EN-75
CONNECTING THE ViviCam 8300s
DIRECTLY TO THE PRINTER FOR PRINTING
IMAGES (PICTBRIDGE FUNCTION)
If a printer that support PictBridge is available, images can be printed by connecting the
ViviCam 8300s directly to the PictBridge-compatible printer without using a computer.
1. Turn on your
ViviCam 8300s.
2. Set the mode dial to [
].
3. On the [Basic] menu, select [USB] with the S/
T buttons, and press the SET button.
4. Select [PictBridge] with the S/T buttons, and
press the SET button.
5. Connect one end of the USB cable to the USB
terminal of the
ViviCam 8300s.
6. Connect the other end of the USB cable to an
available USB port on your computer.
7. Select the item you want to configure with the S/
T buttons, and press the SET button.
[Images]: Select whether you want to print
specific image or all images. You
may also select printing number for
specific image.
[Date Print]: According to the printer type,
select whether you want toprint
the image with date imprint or not.
[Paper Size]: Select the desired paper size
according to the printer type.
[Layout]: Select the desired printing layout
according to the printer type.
[Print]: After all settings is configured, select
this item to start printing.
8. If you select [Images] in the previous step, the
figure shown on the right hand side will appear.
Select [Single] or [All] with the S/T buttons,
and press the SET button.
PictBridge
Adjust
Adjust