Filter
Top Products
Setting or Changing Names
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Select Name Configuration Menu.
The Name Configuration Menu appears.
3. Select the name setting you want to change. The choices are Camera Name, Area Name,
Preset Name, Pattern Name, and Alarm Name.
• If you choose Camera Name, continue with step 6.
• If you choose Area Name, Preset Name, Pattern Name, or Alarm Name, continue with
step 4.
4. The Select Name to Program screen appears.
SELECT NAME TO PROGRAM
PRESET
NUMBER CURRENT NAME
1-96 Preset 1-96
EXIT
FOCUS FAR to program names
/PATTERN/AREA/ALARM
1-3 Pattern 1-3
1-16 Area 1-16
1-4 Alarm 1-4
Note: Gray text refers to other options that may appear on-screen.
5. Press Zoom to change the number. When the item whose name you want to change appears press
Focus Far.
Note: If Presets, Patterns, or Areas have been programmed, the dome automatically points to the
starting position of the associated selection each time the number is advanced.
6. The Name Programming screen appears.
Figure 5-6: Example Name Programming Screen
NAME PROGRAMMING
CAMERA
NAME: CAMERA.............
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
opqrstuvwxyz 0123456
789/-
UNDO CHANGES AND QUIT
EXIT
/PRESET/PATTERN/AREA/ALARM
Blank Space
character
5–8 SpeedDome Ultra VII Operator's Manual