American Dynamics RAS916WLS Security Camera User Manual


 
Command Summary
The following table lists the commands to operate the configuration utility when the dome is installed
in a Manchester environment. The keyboard must be in programming mode to perform these
functions.
If you want to … Use …
Start the configuration utility.
66, then press
Set Preset
1
Move the highlight bar on the active menu.
Pan/Tilt
Select the highlighted item on the active menu.
Focus
Increase the value of the selected setting. For example, Red or Blue
white balance values.
Zoom In
Decrease the value of the selected field. For example, Red or Blue
white balance values.
Zoom Out
Display the next choice for the setting. For example, Maximum
Zoom setting.
Zoom In
Display the previous choice for the setting. For example, Maximum
Zoom setting.
Zoom Out
Save changes and exit the utility from any screen.
Iris Close, then Focus
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in
the selected languages. In these situations, the following commands are used:
If you want to … Use …
Move the highlight left or right in the character field.
Pan
Move the highlight up or down in the character field.
Tilt
Select the highlighted character in the character field.
Focus
Move the cursor to the right of the current character in the name or
password.
Zoom In
Move the cursor to the left of the current character in the name.
Zoom Out
1
The label may read Set Shot on some keyboards.
B–2 SpeedDome Ultra VII Operator's Manual