Filter
Top Products
What’s In This Manual?
The SpeedDome Ultra VII Configuration Utility Operator's Manual is organized as follows:
• Chapter 1:Using the Dome Configuration Utility, describes how to use the SpeedDome Ultra VII
Camera Dome configuration utility.
• Chapter 2: Configuring Pan, Tilt, Zoom, and Synchronization Options, describes how to set the
“flip” feature, zoom stop, line lock, Freeze Frame and resuming auto iris/auto focus mode settings.
• Chapter 3: Configuring Camera Features, describes how to configure camera settings to improve
color and low-light performance.
• Chapter 4: Configuring Alarms, Areas, Home, Privacy Settings, Presets and Scan Limits,
describes how to configure settings associated with alarm inputs, the home position, and the North
setting. In addition, you can also set the boundaries for up to 16 areas, establish left and right scan
limits, as well as program presets and Privacy Zones.
• Chapter 5: Configuring Text Displayed On-Screen, describes how to configure settings
associated with displaying text on-screen. This includes names and status information, as well as
the text format and direction indicators.
• Chapter 6: Configuring Language and Password Settings, describes how to set the language for
the menus and prompts. It also describes how to set and enable a password to prevent unauthorized
use of the configuration utility.
IMPORTANT
If Portuguese is the selected language, the characters “ã” and “õ ” are not available for
display on-screen. This is due to a limitation of the dome’s text overlay chip.
• Chapter 7: Displaying Dome Information, explains how to display essential information about
your dome if service should be required.
• Appendix A: SensorNet and RS-422 Protocols Command Summary, provides information about
commands specific to using the dome in a SensorNet or RS-422 environment.
• Appendix B: Manchester Command Protocol Summary, provides information about commands
specific to using the dome in a Manchester environment.
• Appendix C: Pelco Coaxitron and “P” Protocols Command Summary, provides information
about features and commands supported by Pelco Coaxitron and “P” protocols.
• Appendix D: Panasonic Up-the-Coax (UTC) Protocol Command Summary, provides
information about features and commands supported by Panasonic UTC protocol.
• provides information about
• Appendix F: Vicon Protocol Command Summary, provides information about features and
• Appendix R: Dome Configuration Records, provides a convenient place for listing the
• ons for using this product.
Appendix E: AD Up-the-Coax (UTC) Protocol Command Summary,
features and commands supported by AD UTC protocol.
commands supported by Vicon protocol.
configuration information associated with your camera dome.
Appendix S: Software License Agreement, lists the terms and conditi
vi SpeedDome Ultra VII Operator's Manual