Filter
Top Products
110110
Composite or Y/C signal at BNC Connectors
The IVS has two BNC sockets, which can be switched to
output two independent composite signals or one Y/C signal. If
selected, the Y/C signal is available on the same BNC
connectors, on which the composite signal is outputted.
Therefore it is necessary to switch between both signals
on the BNC connecter.
• Move the cursor > with the keys Ê and Ë to the line
– BNC-OUT. Pressing the key Í or Ì will switch the
output signal on the BNC connector between composite
(VBS) and Y/C
• If Y/C is selected a line symbol – will appear before
Y/C DATA indicating that the Y/C output can now be
switched between normal video and video with data.
Y/C signal with or without data
There are normal video and video with data signals
available from the same pair of connectors. Therefore it is
necessary to switch between the two types of video.
• Move the cursor > with the keys Ê and Ë to the line
– Y/C DATA. Pressing the key Í or Ì will switch between
normal video and video with data in the Y/C signal.
The line displays Y/C DATA ON or OFF.
MENU VIDEO/TEXT ADJUST
- FLICKERFREE ON
- LINE INTERP. ON
-> - BNC OUT VBS
Y/C DATA
- MINI MON DATA ON
- TXT WHITE LEV. 2
- TXT INVERS ON
- TXT FINE POS 5
- EXIT
MENU VIDEO/TEXT ADJUST
- FLICKERFREE ON
- LINE INTERP. ON
- BNC OUT VBS
-> - Y/C DATA ON
- MINI MON DATA ON
- TXT WHITE LEV. 2
- TXT INVERS ON
- TXT FINE POS 5
- EXIT
Video-Assist-System