Filter
Top Products
7373
Composite Video Outputs
Composite video is only available if the output
is switched to VBS out.
• To switch to composite video (VBS mode), enter the
main menu by pressing the Enter/Insert key Ñ for
more than 3 seconds. Go to sub menu VIDEO/TEXT
ADJUST. The menu line BNC OUT can be switched
between VBS and Y/C. See chapter 10.4 Inserter
Facilities for information on the on-screen program mode.
The difference between the outputs is that there is normal
video on the one connector and video with data on the other.
In the normal video output, marked with the È/C symbol
➪ photo, almost no electronic information is inserted.
Only a rolling bar at the button left corner of the video
image indicates a running film camera.
In the video with data output, marked with the É/Y symbol
➪ photo, additional data such as format marks or camera
status information can be inserted.
The outputs are standard BNC sockets for 75 Ω terminated
video signals. Both outputs can be used simultaneously.
MENU VIDEO/TEXT ADJUST
- FLICKERFREE ON
- LINE INTERP. ON
-> - BNC OUT VBS
Y/C DATA
- MINI MON DATA ON
- TXT WHITE LEV. 2
- TXT INVERS ON
- TXT FINE POS. 2
- EXIT
È/CÉ/Y
Video-Assist-System