Filter
Top Products
148148
Camera
Cleaning the Film Gate
Loose dust or dirt leads to a layer of emulsion forming on
the film gate. This can cause scratches on the film and can
also lead to a change in the film’s coefficient of friction.
The film gate must be removed for cleaning.
Attention!
Keep fingers out of the film gate opening as this
may dirty or damage the mirror shutter.
To remove the film gate
• Switch off the camera’s main switch and disconnect the
camera from the power supply before removing the
film gate.
• Turn the inching knob ➪ photo on the movement until
its marking matches that on the movement block.
• Turn the movement locking lever ➪ photo towards the
“OPEN” position to swing the movement block away
from the film gate.
• Pull the film gate out of the camera using the film gate
handle ➪ photo.
locking lever
inching knob
film gate handle
Maintenance