Filter
Top Products
2020
4.6 Grip System
The multipurpose grip system on the ARRIFLEX 235
guarantees high stability through its fixed connection to
the camera body and provides numerous possibilities for
attaching accessories. 3/8“ inner threads allow attachment
in various positions. The versatile system adapts to all
needs depending on the magazine used with the camera.
Standard Camera Handle
The standard camera handle is a single post handle. It can be
mounted in two positions to the camera using two hexagonal
screws ➪ photo. In one position, the handle grip is positioned
above the camera, in the center of gravity. This is useful
for low handheld shots, but only works with the two 235
Shoulder Magazines. In the other position, as seen on the
photo, all magazines can be accommodated.
The handgrip can be attached to any of the 3/8” holes
by first placing the 2 pins ➪ photo into the according
pin holes on the post and then fastening the handgrip screw
➪ photo inside the handgrip by using a long 5mm allen key.
Note: If the standard camera handle is attached in the
other position and the handgrip is mounted to
the additional 3/8” hole the handgrip is
positioned in the center of gravity.
hexagonal screws
additional
3/8“ mounting point
5mm allen keymounting screw
Installation