Axis Communications 2100 Security Camera User Manual


 
AXIS 2100 User’s Guide Adjusting the Camera Focus
39
Replacing the Lens
Because the AXIS 2100 is designed with a CS-mount, the lens supplied with your camera
can be replaced with any standard CS or C lens typically used in the security/CCTV
industry. Contact a security/CCTV reseller in your area for more information.
Note: Although the lens supplied with your camera can be replaced with any CS-type lens, a C-type
lens must first be fitted with an adaptor for it to work with your AXIS 2100. This adaptor effec-
tively moves the lens 5mm farther from the camera.
Follow the instructions below to replace the supplied lens with any C or CS type lens:
1. Unscrew the AXIS 2100
lens.
2. C-lens only: Attach the new
lens to a CS-C Adapter.
3. Screw the new lens onto the
AXIS 2100. If applicable,
adjust the iris according to
the prevailing light
conditions.
4. Referring to Focusing the
Camera Under Stable
Conditions, on page 37,
adjust the camera focus.
5. Refrsh your browser and
check the results from the
camera’s Home Page.
CS-C Adaptor
New lens