Filter
Top Products
AXIS 212 PTZ - System Options
39
Plain Config - This function is for the advanced user with experience of Axis network camera configuration. All
parameters can be set and modified from this page. Help is available from the standard help pages.
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page
(as described in
Maintenance, on page 38) or use the Control button on the underside of the camera (see page 6)
as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Disconnect the power adapter.
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to
15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete
and the camera has been reset. The unit will now have the default IP address 192.168.0.90
Note:
Resetting to the factory default settings using the Control Button will cause all parameters (including the IP address) to be reset. Refer
to Maintenance, on page 38 for other methods that do not reset the IP address.