Filter
Top Products
AXIS 212 PTZ - Product Features
6
Key features
Overview
Network
connector
Dome casing
Camera unit
Power
indicator
Network
indicator
Audio out
Audio in
(LED)
(LED)
Cover
plate
Power
connector
I/O terminal
connector
Control
button
Serial number (S/N)
Please make a note of the
The serial number is required
during the installation.
serial number and retain
for future reference.
Microphone
Status
indicator
(LED)
Power connector - For connection of the PS-H power adapter (included).
I/O terminal connector - The I/O terminal connector provides the physical interface to one transistor output,
one digital input and an auxiliary connection point for DC power. For more information, see
The I/O Terminal
Connector, on page 40.
Network connector - The camera connects to the network via a standard network connector. Supporting
NWAY, the camera detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). Supporting
PoE (Power over Ethernet), the camera can be powered directly from the network cabling.
Audio out- Audio output (line level), which can be connected to a public address (PA) system or an active
speaker with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used
for the audio out.
Audio in - One 3.5mm input for a mono microphone, or for line-in mono signal (left channel is used from a
stereo signal).
Microphone - Built-in microphone. To prevent unauthorized listening, the internal microphone can be disabled
by inserting a plug in the 'Audio in' connector.
Serial number label - The serial number may be required during installation.
Control button - Press this button to install the camera using the AXIS Internet Dynamic DNS Service, or to
restore the factory default settings, as described in
Resetting to the Factory Default Settings, on page 39.