Filter
Top Products
AXIS 212 PTZ - Accessing the Camera
9
AXIS Media Control
The AXIS Media Control (AMC) is installed automatically the first time the camera is accessed from Microsoft
Internet Explorer. The AMC control panel can be opened by right-clicking on the video image in the Live View
web page. The AMC control panel can be used to configure various video and audio settings. Please see the
readme file included in the tool for more information.
Accessing the camera from the Internet
Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet you
must configure your broadband router to allow incoming data traffic to the camera. One way to do this is to
enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the
camera. This is enabled from Setup > System Options > Network > TCP/IP Advanced.
For more information, please see NAT traversal (port mapping), on page 35. See also the AXIS Internet Dynamic
DNS Service at www.axiscam.net or, for Technical notes on this and other topics, visit the Axis Support Web at
www.axis.com/techsup