Filter
Top Products
26
AXIS 231D/232D - Dome Configuration
Dome Configuration
Preset Positions
A preset position is a pre-defined camera view than can be used to quickly move the
camera to a specific location.
From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera
to the required position. When satisfied with the camera's position, enter a descriptive
name and click on Add. The camera position, iris and focus settings are then saved as a
preset position.
The position can be assumed at any time,
by selecting the preset's name from the
Preset positions drop-down list. Preset
positions can be used in a Sequence mode
(Live View Config>Sequence mode) and
Event Types (Event Configuration>Event
Types)
One position can be set as the Home
position, which is readily accessible by
clicking on the Home button in both the
Preset Position Setup window and the Live
View window.
Guard Tour
A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined
order or randomly, and for configurable time periods. Unlike the Sequence Mode, which is
a viewing application under Live View Config (see
page 25), the guard tour sequence will
keep running after the user has logged off or closed the Web browser.
Advanced
Limits - Define the pan, tilt, zoom and focus limits for the AXIS 231D/232D. Movements
to the left and right, up and down can be restricted to narrow the area under surveillance.
The near focus limit can be set to avoid focusing on objects too close to the camera.
Note: Once a limit has been saved, this position can not be exceeded by the dome camera unless the values have
been reset and saved to a greater value first (i.e. reset the default values of the mechanical restrictions).
Move speed sets the speed of the camera's Pan/Tilt movements. The default setting is
maximum speed.