Filter
Top Products
39
AXIS 231D/232D - System Options
Link-Local Address
This is enabled by default and assigns the AXIS 231D/232D an additional IP address for
use with UPnP™. The AXIS 231D/232D can have both a Link-Local IP and a
static/DHCP-supplied IP address at the same time - these will not affect each other.
HTTP
The default HTTP port number (80) can be changed to any port within the range
1024-65535. This is useful for e.g. simple port mapping.
HTTPS
If applicable, enter the HTTPS port the AXIS 231D/232D will use. The default setting (443)
can be changed to any port within the range 1024-65535. HTTPS is used to provide
encrypted web browsing.
NAT traversal
Use NAT traversal when your AXIS 231D/232D is located on an intranet (LAN) and you
wish to make it available from a NAT router. When properly configured all HTTP traffic to
an external port in the NAT router will be forwarded to the network camera.
Enable/Disable - When enabled, the AXIS 232D will attempt to configure port mapping in
a NAT router on your network, using UPnP™.
Use manually selected NAT router - Select this option to manually select a NAT router.
Enter the IP address for the router in the field provided.
If a router is not manually specified, the AXIS 231D/232D will automatically search for
NAT routers on your network. If more than one router is found, the default router will be
selected.
Alternative HTTP port - Select this option to manually define an external HTTP port. Enter
the port number in the field provided. If no port is entered here a port number will
automatically be selected when NAT traversal is enabled.
For more information, please see the online help
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP
port number to use. The default setting is (554).
Network Traffic
The default setting is Auto-negotiate which means that the correct speed is automatically
selected. If necessary, you can set the connection speed by selecting it from the drop-down
list.