Axis Communications 232D+ Security Camera User Manual


 
AXIS COMMUNICATIONS
<Product Name> Quick User’s Guide
2
About This Document
This manual is intended for administrators and users of the AXIS
231D+/232D+ Network Dome Camera, and is applicable for software
release 4.47. It includes instructions for using and managing the
AXIS 231D+/232D+ on your network. Previous experience of
networking will be of use when installing and using this product.
Some knowledge of UNIX or Linux-based systems would also be
beneficial, for developing shell scripts and applications. Later
versions of this document will be posted to the Axis Website, as
required. See also the product’s online help, available via the
Web-based interface.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology
embodied in the product described in this document. In particular,
and without limitation, these intellectual property rights may
include one or more of the patents listed at
http://www.axis.com/patent.htm and one or more additional patents
or pending patent applications in the US and other countries.
This product includes software developed by the OpenSSL Project
fo
r use in the OpenSSL Toolkit:
http://www.openssl.org/
Legal Considerations
Camera surveillance can be prohibited by laws that vary from
country to country. Check the laws in your local region before using
this product for surveillance purposes. This product includes one (1)
MPEG-4 decoder license. To purchase further licenses, contact your
reseller.
Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does
cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Re-orient or
relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment to an outlet on a
different circuit to the receiver. Consult your dealer or an
experienced radio/TV technician for help. Shielded (STP) network
cables must be used with this unit to ensure compliance with EMC
standards.
USA - This equipment has been tested and found to comply with
the limits for a Class A computing device pursuant to Subpart B of
Part 15 of FCC rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is
likely to cause interference, in which case the user at his/her own
expense will be required to take whatever measures may be required
to correct the interference.
Canada - This Class A digital apparatus complies with Canadian
ICES-003.
Europe - This digital equipment fulfills the requirements
for radiated emission according to limit A of EN55022/1998, and
th
e requirements for immunity according to EN55024/1998
residential, commercial, and light industry. Warning! This is a Class
A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take
adequate measures.
Japan - This is a class A product based on the standard of the
Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or
television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the
instruction manual.
Australia - This electronic device meets the requirements of the
Radio communications (Electromagnetic Compatibility) Standard
1998 AS/NZS 3548. Warning! This is a Class A product. In a
domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
Liability
Every care has been taken in the preparation of this manual; Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this material.
Trademark Acknowledgments
Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, Linux, Macintosh,
Microsoft, Mozilla, Netscape Navigator, UNIX, Windows, WWW are
registered trademarks of the respective holders. Java and all Java-based
trademarks and logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries. UPnP is a
certification mark of the UPnP
TM
Implementers Corporation. Axis
Communications AB is independent of Sun Microsystems Inc.
RoHS
This product complies with both the European RoHS directive,
2002/95/EC, and the Chinese RoHS regulations, ACPEIP.
WEEE Directive
The European Union has enacted a Directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE Directive).
This directive is applicable in the European Union member
st
ates.
The WEEE marking on this product (see right) or its
do
cumentation indicates that the product must not be disposed
of together with household waste. To prevent possible harm to
human health and/or the environment, the product must be disposed of
in an approved and environmentally safe recycling process. For further
information on how to dispose of this product correctly, contact the
product supplier, or the local authority responsible for waste disposal in
your area.
Business users should contact the product supplier for information on
ho
w to dispose of this product correctly. This product should not be
mixed with other commercial waste.
Axis Customer Services
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your reseller
will forward your queries through the appropriate channels to ensure a
rapid response. If you are connected to the Internet, you can:
• download user documentation and firmware updates
find answers to resolved problems in the FAQ database. Search by
product, category, or phrases
report problems to Axis support staff by logging in to your private
su
pport area
visit the Axis Support Web at www.axis.com/techsup/
Safety Notice - Battery Replacement
The AXIS 231D+/232D+ uses a 3.0V CR2032 Lithium battery as the
power supply for its internal real-time clock (RTC). This battery will,
under normal conditions, last for a minimum of 5 years. Low battery
power affects the operation of the RTC, causing it to reset at every
power-up. A log message will appear when battery replacement is
required.
The battery should not be replaced unless required!
If the battery does need replacing, please observe the following points:
Caution!
Danger of Explosion if battery is incorrectly replaced
Replace only with the same or equivalent battery, as recommended by
t
he manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
AXIS 231D+/232D+ Network Dome Camera User’s Manual,
Re
vision 4.0
Date: April 2009
Part No: 35006
Copyright© Axis Communications AB, 2007 - 2009