Filter
Top Products
44
AXIS 231D+/232D+ - System Options
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network
devices. Depending on the level of security required, select the version of SNMP to use. The
three levels of security are:
• SNMP V1 - includes no security.
• SNMP V2c - uses very simple security. The community name
can be specified as a
password for read or read/write access to all supported SNMP objects. The com-
munity is the the group of network devices using SNMP
.
• SNMP V3 - provides encryption and secure passwords.
HTTPS must be enabled.
UPnP™
(Universal Plug and Play) The AXIS 231D+/232D+ includes support for UPnP™ in Windows
ME and Windows XP. UPnP
™ is enabled by default.
Note:
UPnP must be installed on your workstation. To do this, open the Control Panel from the Start Menu and
select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Ser-
vices section. Click Details and then select UPnP as the service to add. Refer to the Windows help files for
more information.
RTP (Multicast)/ MPEG-4
These settings are for the IP addresses, port numbers, and Time-To-Live values to use for
media streams in the MPEG-4 format.
Port Range - the RTP Port range defines the range of ports
from which the video/audio
ports are automatically selected. This feature is useful if the AXIS 231D+/232D+ is
connected to a NAT router with manually configured port mapping.
Multicast - only IP addresses within certain
ranges can be used for multicasting. The AXIS
231D+/232D+ has been pre-configured with addresses from these ranges, and does not
normally need to be reconfigured.
For more information, please see the online help.
Bonjour
Your Axis network camera includes support for Bonjour. When enabled, the camera is
automatically detected by operating systems and clients that support this protocol.
Ports & devices - I/O Ports
The pinout, interface support and the control and monitoring functions are described in
the section on the Connection Module, o
n page 48.