Filter
Top Products
22
AXIS 231D+/232D+ - Live View Config
Note: It is also possible to view Motion JPEG when MPEG-4 is chosen as default and vice
versa.
Default Viewer
From the drop-down lists, select the default method for viewing video images in your
browser. The camera attempts to show the video images in the selected video format and
viewer. If this is not possible, the camera overrides the settings and selects the best
available combination.
Viewer Settings
The Show viewer toolbar option displays the AMC toolbar under the video stream.
The Enable MPEG-4 decoder
installation option allows the Administrator to enable or
disable the installation of the MPEG-4 decoder. This is used to prevent the installation of
unlicensed copies. Further decoder licenses can be purchased from your Axis dealer.
The Show
crosshair in PTZ joystick mode option indicates the center of the image when
viewing the video stream in PTZ joystick mode.
The Use PTZ
joystick mode as default option allows you to set the PTZ mode to joystick.
The Enable recording button option will start an MPEG-4 recording directly from the Live
View page.
Action Buttons
These buttons can be used to manually trigger and stop an event from the Live View page.
The snapshot button allows you to take a snapshot of the video stream and save it to a
computer.
Browser Viewer Description
Windows
Internet Explorer
AMC Recommended viewer in Windows Internet Explorer (MPEG-4
/Motion JPEG).
QuickTime MPEG-4 only.
Java applet A slower imaging alternative to AMC. Requires one
of the following installed on the client:
• JVM (J2SE) 1.4.2 or higher
•
JRE (J2SE) 5.0 or higher
Still image Displays still images only. Hit the Refresh button in your browser to view a new image.
Other browsers
Server Push Recommended viewer for other browsers (Motion JPEG).
QuickTime MPEG-4 only.
Java applet A slower imaging alternative to Server
Push (Motion JPEG only).
Still image Displays still images only. Hit the Refresh button in your browser to view a new image.