Filter
Top Products
VIP X1 | Installation and Operating Manual EN | 111
Bosch Security Systems | 2006-12 | V2.5 Operation
Selecting recordings
All sequences that are saved in the partition are displayed in the list. A running
number (track) is assigned to each sequence. Start time and stop time, record-
ing duration, number of alarms, and recording type are displayed.
– Click a list entry. The playback for the selected sequence starts immediately
in the video window.
Controlling a playback
You will see a time bar below the video image for quick orientation. If a particular
sequence has been selected for playback by means of click, the selected
sequence appears in the list in blue with a green border. The associated time
interval is displayed in the bar in gray. A green arrow above the bar indicates the
position of the image currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
– You can change the time interval displayed by moving the gray area to the
left or right while holding down the mouse button.
– You can change the time interval displayed by clicking the zoom keys (mag-
nifying glass icons). The display can span a range from two months to a few
seconds.
– You can select a different sequence for playback by clicking on the corre-
sponding gray marking.