VIP X1 | Installation and Operating Manual EN | 9
Bosch Security Systems | 2006-12 | V2.5 Safety information
Safety information 2
Electric shock hazard
❚ Never attempt to connect the unit to any power network other than the type
for which it is intended.
❚ Use only the power supply unit provided.
❚ Never open the housing.
❚ Never open the housing of the power supply unit.
❚ If a fault occurs, disconnect the power supply unit from the power supply and
from all other units.
❚ Install the power supply and the unit only in a dry, weather-protected location.
❚ If safe operation of the unit cannot be ensured, remove it from service and
secure it to prevent unauthorized operation. Safe operation is no longer pos-
sible in the following cases,
– if there is visible damage to the unit or power cables,
– if the unit no longer operates correctly,
– if the unit has been exposed to rain or moisture,
– if foreign bodies have penetrated the unit,
– after long storage under adverse conditions, or
– after exposure to extreme stress in transit.
In such cases, have the unit checked by Bosch Security Systems.