Filter
Top Products
EN | 74 Installation and Operating Manual | VIP X1
Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5
Note
On the Livepage configuration page, you can enable additional informa-
tion overlays for the live video image too (see page 96).
Analysis type:
Select the required analysis algorithm. By default, only MOTION+ is available –
this offers a motion detector and essential recognition of tampering. The current
alarm status is displayed for information purposes.
Note
Additional analysis algorithms with comprehensive functions such as
IVMD are available from Bosch Security Systems.
Motion detector (MOTION+ only)
For the detector to function, the following conditions must be met:
❚ Analysis must be activated.
❚ At least one sensor field must be activated.
❚ The individual parameters must be configured to suit the operating environ-
ment and the desired responses.
❚ The sensitivity must be set to a value greater than zero.
Caution
Reflections of light (off glass surfaces, etc.), switching lights on or off or
changes in the light level caused by cloud movement on a sunny day can
trigger unintended responses from the motion detector and generate false
alarms. Run a series of tests at different times of the day and night to en-
sure that the video sensor is operating as intended.
For indoor surveillance, ensure constant lighting of the areas during the
day and at night.
Sensitivity: (MOTION+ only)
The basic sensitivity of the motion detector can be adjusted for the environmen-
tal conditions to which the camera is subject.
The sensor reacts to variations in the brightness of the video image. The darker
the observation area, the higher the value that must be selected.