Filter
Top Products
VIP X1 | Installation and Operating Manual EN | 69
Bosch Security Systems | 2006-12 | V2.5 Configuration using a Web browser
Alarm sources
You can configure the possible alarm triggers for the VIP X1 (for example, the
alarm inputs).
Alarm input 1: to Alarm input 4:
Select the option On to activate the alarm by the corresponding external alarm
sensor. Otherwise, select Off.
Select Active high if the alarm is to be triggered by closing the contact.
Select Active low if the alarm is to be triggered by opening the contact.
Name:
You can enter a name for each alarm input, which is then displayed below the
icon for the alarm input on the LIVEPAGE if configured correctly (see Livepage
configuration, page 94).
Video loss alarm:
Activate the checkbox if you want an interruption of the video signal to also trig-
ger an alarm.